Ways To Check The Heating and air conditioning

Check your Hvac device every six months and head off costly problems. We’ll take you step-by-step through air conditioning and heating inspections that can be done yourself.

 

Falling leaves and budding trees are semi-annual signals to check Air conditioning units to make sure hvac flow freely and properly. Certain mechanical pieces, such as the flue pipe that expels carbon monoxide, must only checked by a professional. But you could eyeball different Heating and cooling components and save cash on house calls and energy charges.

 

Examine filters

Hvac filters, which clean the air returning to your Heating and cooling system, would be the easiest and most obvious elements to test. Yours should be dust and dirt-free since you’ve cleaned or changed them once per month. (Ahem!) If you’ve fallen behind on air conditioner filter routine maintenance, clean or rinse them under a hose or faucet, or change disposables.

 

Ductwork problems

Uncovered ductwork in your basement, attic, or Starbucks-style loft is easy to inspect. Look for:

Peeling duct tape and loose fittings around seams

Dust lines that indicate escaping air

Dings in metal

Collapsed or torn areas of flex ducts.

Furnace flames

Start the central heater and examine the flame. It should be a steady blue, not a flickering yellow or orange, which indicates combustion concerns that require specialist help. Be sure side panels are closed and fastened.

Grills and registers

Examine air return grills and Air conditioning registers for dust, dirt, and pet hair that restricted air movement. Open and shut registers to make sure they function. Make sure furniture hasn’t wandered over vents.

Hvac compressors

Be sure outside compressors are unobstructed by vines, shrubs, and leaves. Check that condensor device fins are straight and undamaged. Place a level on the top of devices to identify a tilt, which hurts efficiency. If not level, slip a shim underneath the system. Take off the top panel and check the fan blades for damages, but don’t correct a bent blade yourself: Call an expert to change the blade ($200 to $300).

Thermostat check

Inspect thermostats by removing covers to sleuth out dirt and dust that could reduce the life of mechanisms. Eliminate dust by lightly cleaning using a Q-Tip. Shingle Springs Plumbers

The post Ways To Check The Heating and air conditioning appeared first on Heating and Air Elk Grove.